Parker Valvair II Four-Way. Manifold Mounted valves have been trusted for years in applications requiring a heavy-duty, all-metal valve that will shift when called upon, even after being idle for an extended period of time. The solenoid/air pilot design of this valve uses line pressure to shift the spool. Single solenoid valves may be mounted in any position. Double solenoid valves should be mounted horizontally. Synthetic rubber o-ring seals are specially compounded for superior wear and abrasion resistance. Solenoids are encapsulated in epoxy for low power consumption and maximum life. These valves are very tolerant to contamination both inside and out. In dirty applications like foundries, steel mills, tire plants, aggregate plants and mines, they can be real problem solvers.
applications
Foundries
Steel mills
Tire plants
Aggregate plants
Mines
features
Lubrication recommended
Lights
Yes
Basic Size
1 in
Stations
N/A
Actuator Type
Solenoid
Coil Style
Encapsulated
Valve Duty
Standard Duty
Operation
Electric
Valve Type
4-Way, 3 Position
Port Type
NPT
Cv Flow
11.3
Installed Options
None
Operator
Solenoid w/Light & Locking Override
Wiring Options
None
Series
Valvair II Series
Spool Description
All Ports Blocked
Overrides
No Overrides
Valve Body Style
Manifold Mounted
Return Type
Solenoid
Solenoid
Double
Port Size
1
Length
13.620 in
Voltage Rating
120 VAC, 60 Hz
Height
8.740 in
Valve Size
1 in
Operating Pressure Range
35 psi to 140 psi
Weight
18.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
