Parker Valvair II Four-Way. Manifold Mounted valves have been trusted for years in applications requiring a heavy-duty, all-metal valve that will shift when called upon, even after being idle for an extended period of time. The solenoid/air pilot design of this valve uses line pressure to shift the spool. Single solenoid valves may be mounted in any position. Double solenoid valves should be mounted horizontally. Synthetic rubber o-ring seals are specially compounded for superior wear and abrasion resistance. Solenoids are encapsulated in epoxy for low power consumption and maximum life. These valves are very tolerant to contamination both inside and out. In dirty applications like foundries, steel mills, tire plants, aggregate plants and mines, they can be real problem solvers.
applications
Foundries
Steel mills
Tire plants
Aggregate plants
Mines
caution
Read and observe the special usage warning on the label
Stations
N/A
Coil Style
Encapsulated
Return Type
Solenoid
Voltage Rating
24 VDC
Wiring Options
None
Series
Valvair II Series
Spool Description
N/A
Installed Options
None
Length
7.380 in
Solenoid
Double
Valve Body Style
Manifold Mounted
Valve Type
4-Way, 2 Position
Height
6.930 in
Valve Size
1 in
Port Size
1
Basic Size
1 in
Operation
Electric
Overrides
No Overrides
Port Type
NPT
Lights
Yes
Cv Flow
11.3
Operator
Solenoid w/Light & Locking Override
Valve Duty
Standard Duty
Actuator Type
Solenoid
Operating Pressure Range
35 psi to 140 psi
Weight
15.0 LB
We're here for you
with Service Centers across the country - We have your back