Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 23" Stroke
- Steel Rails
- Composite Bearing
- 2" Bore NFPA Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Support Rod Diameter | 25 mm |
| Weight per Inch | 0.64 lb |
| Cylinder Seal Material | Buna-N |
| Base Wt. | 14.35 lb |
| Positions | 2 Position |
| Port Type | NPTF |
| Stroke | 23 in |
| Cylinder Bore Size | 2 in |
| Port Size | 3/8 |
| Series | HBT |
| Slide Configuration Option Code | B |
| Proximity Sensor | No Proximity Sensor |
| Bearing Type | Composite Bearing |
| Temperature Range [Max] | 165 °F |
| Slide Type | Thrust Slide |
| Slide Orientation | Right Hand (Standard) |
| Cushions - Slide | No Cushions |
| Support Rod Material | Steel |
| Temperature Range [Min] | 0 °F |
| Cylinder Type | NFPA Pneumatic Cylinder |
| Flow Controls | w/o Flow Controls |
| Bumpers - Slide | Bumpers (Both Ends) |
| Shock Absorbers - Slide | No Shock Absorber |
| Pressure [Max] | 150 psi |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Proximity Sensor Code | None |
| Intermediate Stroke | N/A |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Port Location | Standard (Position 1) |
| Weight | 29.07 LB |
