The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
Flow controls
Fluorocarbon (Viton) seals
Oversized shafting with composite bushings
Proximity sensors
Three-position cylinders
Adjustable stop collars
Cylinder cushions
Cylinder with rod lock mechanism
External bumpers
Bumpers - Slide
Bumpers w/Adjustable Stop Collar (Retract Only)
Shock Absorbers - Slide
Shock Absorber (Extend Only)
Proximity Sensor Code
None
Support Rod Diameter
25 mm
Cushions - Slide
Cushioned (Both Ends)
Stroke Tolerance
+0.030 in / -0.000 in
Intermediate Stroke
N/A
Weight per Inch
0.64 lb
Dowel Pin Holes
w/o Dowel Pin Holes
Proximity Sensor
No Proximity Sensor
Flow Controls
w/o Flow Controls
Port Size
3/8
Stroke
19 in
Series
HBT
Slide Type
Thrust Slide
Pressure [Max]
150 psi
Positions
2 Position
Cylinder Bore Size
2 in
Bearing Type
Composite Bearing
Support Rod Material
Steel
Port Type
NPTF
Temperature Range [Max]
165 °F
Temperature Range [Min]
0 °F
Cylinder Type
NFPA Pneumatic Cylinder
Port Location
Standard (Position 1)
Base Wt.
14.35 lb
Cylinder Seal Material
Buna-N
Slide Configuration Option Code
A1, C, B3
Slide Orientation
Right Hand (Standard)
Weight
26.51 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
