The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
Three-position cylinders
Adjustable stop collars
Cylinder cushions
Cylinder with rod lock mechanism
External bumpers
Flow controls
Fluorocarbon (Viton) seals
Oversized shafting with composite bushings
Proximity sensors
Stroke Tolerance
+0.030 in / -0.000 in
Port Size
1/4
Shock Absorbers - Slide
Shock Absorber w/Stroke Adjuster (Both Ends)
Cylinder Bore Size
1.5 in
Slide Type
Thrust Slide
Flow Controls
w/o Flow Controls
Slide Configuration Option Code
A
Positions
2 Position
Proximity Sensor
Prox Ready, 12 mm
Stroke
8 in
Bumpers - Slide
No Bumpers
Temperature Range [Min]
0 °F
Series
HBT
Temperature Range [Max]
165 °F
Support Rod Diameter
25 mm
Cylinder Type
NFPA Hydraulic Cylinder
Cylinder Seal Material
Buna-N
Base Wt.
9.83 lb
Intermediate Stroke
N/A
Port Type
NPTF
Port Location
Standard (Position 1)
Weight per Inch
0.63 lb
Proximity Sensor Code
J1
Support Rod Material
Steel
Bearing Type
Composite Bearing w/Oversized Support Rods
Pressure [Max]
750 psi
Cushions - Slide
No Cushions
Dowel Pin Holes
w/o Dowel Pin Holes
Slide Orientation
Right Hand (Standard)
Weight
14.87 LB
We're here for you
with Service Centers across the country - We have your back