The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
Three-position cylinders
Adjustable stop collars
Cylinder cushions
Cylinder with rod lock mechanism
External bumpers
Flow controls
Fluorocarbon (Viton) seals
Oversized shafting with composite bushings
Proximity sensors
Proximity Sensor
Prox Ready, 12 mm
Cylinder Bore Size
1.5 in
Shock Absorbers - Slide
Shock Absorber w/Stroke Adjuster (Both Ends)
Flow Controls
w/o Flow Controls
Stroke Tolerance
+0.030 in / -0.000 in
Temperature Range [Min]
0 °F
Slide Orientation
Right Hand (Standard)
Temperature Range [Max]
165 °F
Port Type
NPTF
Port Location
Standard (Position 1)
Intermediate Stroke
N/A
Series
HBT
Support Rod Diameter
25 mm
Pressure [Max]
150 psi
Bumpers - Slide
No Bumpers
Slide Configuration Option Code
A
Weight per Inch
0.63 lb
Cushions - Slide
No Cushions
Port Size
1/4
Positions
2 Position
Cylinder Seal Material
Buna-N
Support Rod Material
Steel
Dowel Pin Holes
w/o Dowel Pin Holes
Proximity Sensor Code
J1
Cylinder Type
NFPA Pneumatic Cylinder
Base Wt.
9.83 lb
Bearing Type
Composite Bearing w/Oversized Support Rods
Slide Type
Thrust Slide
Stroke
8 in
Weight
14.87 LB
We're here for you
with Service Centers across the country - We have your back