Parker's B3 and B5 series three-way., body ported valves are ideal for controlling larger single-acting cylinders, air bags and vacuum generators. Body ported for in-line, direct pipe porting. The same valve can also be used on Parker's IEM (Inlet/Exhaust Manifold), allowing more than one valve to be mounted on a common base. Featuring Parker's exclusive Wear Compensation System, expect millions of non-lubricated cycles from this valve. Electrical connections are easy using Parker's 15 mm DIN-style connectors. Flush non-locking overrides are standard.
features
IEM (inlet/exhaust manifold)
Factory prelubricated
CE approved
Maximum Performance – low friction, fast response, lower operating pressures and less wear
Long Cycle Life – under pressure, radial expansion of the seal occurs to maintain sealing contact with the value bore
NonLube Service – no lubrication required for continuous valve shifting
Bi-Directional Spool Seals – common spool used for any pressure, including vacuum
Engineering Level
C
Actuator Type
Solenoid
Spool Seal Type
Buna-N
Return Type
Spring
Spool Description
Normally Closed
Stations
N/A
Length
5.290 in
Width
1.180 in
Valve Type
3-Way, 2 Position
Operation
Electric
Valve Body Style
Inline
Temperature Range [Max]
120 °F
Port Size
3/8
Solenoid
Single
Operating Pressure Range
Vacuum to 145 psi
Outlet Port
3/8 in NPT
Temperature Range [Min]
5 °F
Valve Duty
Standard Duty
Installed Options
None
Overrides
Flush - Non-Locking Override
Coil Style
15 mm 3-Pin DIN 43650C
Cv Flow
1.4
Series
B5
Wiring Options
None
Height
2.060 in
Port Type
NPT
Voltage Rating
120 VAC
Pilot Exhaust
Vented Pilot Exhaust
Pilot Source
Internal Pilot Supply - Port 1
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
