Parker's B3 and B5 series three-way., body ported valves are ideal for controlling larger single-acting cylinders, air bags and vacuum generators. Body ported for in-line, direct pipe porting. The same valve can also be used on Parker's IEM (Inlet/Exhaust Manifold), allowing more than one valve to be mounted on a common base. Featuring Parker's exclusive Wear Compensation System, expect millions of non-lubricated cycles from this valve. Electrical connections are easy using Parker's 15 mm DIN-style connectors. Flush non-locking overrides are standard.
features
IEM (inlet/exhaust manifold)
Factory prelubricated
CE approved
Maximum Performance – low friction, fast response, lower operating pressures and less wear
Long Cycle Life – under pressure, radial expansion of the seal occurs to maintain sealing contact with the value bore
NonLube Service – no lubrication required for continuous valve shifting
Bi-Directional Spool Seals – common spool used for any pressure, including vacuum
Series
B5
Wiring Options
None
Overrides
Flush - Non-Locking Override
Port Size
3/8
Outlet Port
3/8 in NPT
Stations
N/A
Valve Type
3-Way, 2 Position
Height
2.060 in
Temperature Range [Min]
5 °F
Temperature Range [Max]
120 °F
Pilot Exhaust
Vented Pilot Exhaust
Port Type
NPT
Return Type
Spring
Engineering Level
C
Width
1.180 in
Solenoid
Single
Voltage Rating
24 VDC
Actuator Type
Solenoid
Valve Body Style
Inline
Valve Duty
Standard Duty
Operating Pressure Range
Vacuum to 145 psi
Pilot Source
Internal Pilot Supply - Port 1
Spool Description
Normally Closed
Spool Seal Type
Buna-N
Operation
Electric
Coil Style
15 mm 3-Pin DIN 43650C
Length
5.290 in
Installed Options
None
Cv Flow
1.4
Weight
2.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
