6322

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100761736

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

icNumber	7696807
I.D.	110 mm
Cage Material	Pressed Steel
Preload Level	None
Locking Device	No Locking Device
O.D.	240.0000 mm
Precision Level	Standard (ABEC 1)
Inch/Metric	Metric Bore
Snap Ring	No Snap Ring
Radial Internal Clearance	Normal
Outer Ring Width	50 mm
Dynamic Load Rating	46,200.00 lbf
Ball Material	Steel
Static Load Rating [Max]	40,300.00 lbf
Limiting Speed - Oil	3000 rpm
Limiting Speed - Grease	2400 rpm
Precision	Standard
Cage Type	Metal
Enclosure	Open
Corner Radius [Min]	3.00 mm
No. in Set	Single Bearing
Bore Type	Round Bore
Capacity	Standard Capacity
Rows of Balls	Single
Material	Steel
Bearing Type	Radial
Radial Internal Clearance Specification	Normal Clearance
Seal Type	Unsealed
Seal Material	None
Width	50 mm
Lubricant	Oil Preservative
Inner Ring Width	50 mm
O.D. Type	Straight
Contact Angle	0°
Weight	20.759 LB
EAN or UPC	29176018008