6320C3

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100761714

Auto Replenish

Select an Auto-Replenish Interval

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Capacity	Standard Capacity
Limiting Speed - Oil	3400 rpm
Precision	Standard
Bore Type	Round Bore
I.D.	100 mm
Dynamic Load Rating	38,906.00 lbf
Width	47 mm
Material	Steel
O.D. Type	Straight
Cage Material	Pressed Steel
Bearing Type	Radial
Enclosure	Open
Radial Internal Clearance Specification	Greater Than Normal Clearance
Limiting Speed - Grease	2800 rpm
Inch/Metric	Metric Bore
No. in Set	Single Bearing
Cage Type	Metal
Rows of Balls	Single
icNumber	7696421
Seal Type	Unsealed
O.D.	215.0000 mm
Seal Material	None
Lubricant	Mul-Temp SRL
Snap Ring	No Snap Ring
Outer Ring Width	47 mm
Radial Internal Clearance	C3
Precision Level	Standard (ABEC 1)
Preload Level	None
Static Load Rating [Max]	31,800.00 lbf
Contact Angle	0°
Ball Material	Steel
Inner Ring Width	47 mm
Corner Radius [Min]	3.00 mm
Locking Device	No Locking Device
Weight	15.335 LB
EAN or UPC	29176017858