6318

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100761667

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Material	Steel
Static Load Rating [Max]	24,100.00 lbf
Enclosure	Open
No. in Set	Single Bearing
I.D.	90 mm
Limiting Speed - Oil	4300 rpm
Limiting Speed - Grease	3600 rpm
Ball Material	Steel
Precision	Standard
Rows of Balls	Single
Precision Level	Standard (ABEC 1)
Outer Ring Width	43 mm
Seal Material	None
icNumber	7697605
Inch/Metric	Metric Bore
O.D.	190.0000 mm
Inner Ring Width	43 mm
Preload Level	None
Radial Internal Clearance	Normal
Cage Type	Metal
Dynamic Load Rating	33,755.00 lbf
Lubricant	Oil Preservative
Radial Internal Clearance Specification	Normal Clearance
Contact Angle	0°
Locking Device	No Locking Device
Cage Material	Pressed Steel
Snap Ring	No Snap Ring
Seal Type	Unsealed
Width	43 mm
O.D. Type	Straight
Capacity	Standard Capacity
Corner Radius [Min]	3.00 mm
Bearing Type	Radial
Bore Type	Round Bore
Weight	11.023 LB
EAN or UPC	29176017728