6315

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100761590

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Bore Type	Round Bore
O.D. Type	Straight
Limiting Speed - Grease	4300 rpm
Precision Level	Standard (ABEC 1)
Radial Internal Clearance Specification	Normal Clearance
O.D.	160.0000 mm
Bearing Type	Radial
Inch/Metric	Metric Bore
Rows of Balls	Single
Precision	Standard
Outer Ring Width	37 mm
Inner Ring Width	37 mm
Locking Device	No Locking Device
Width	37 mm
Contact Angle	0°
Enclosure	Open
Seal Type	Unsealed
Cage Type	Metal
No. in Set	Single Bearing
Preload Level	None
Seal Material	None
Static Load Rating [Max]	17,400.00 lbf
Corner Radius [Min]	2.10 mm
Radial Internal Clearance	Normal
Cage Material	Pressed Steel
I.D.	75 mm
Capacity	Standard Capacity
Dynamic Load Rating	26,674.00 lbf
Snap Ring	No Snap Ring
Ball Material	Steel
Material	Steel
Lubricant	Oil Preservative
Limiting Speed - Oil	5000 rpm
Weight	6.783 LB
EAN or UPC	29176017483