6312DDUC3

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100761468

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Preload Level	None
Cage Type	Metal
Outer Ring Width	31 mm
Contact Angle	0°
Radial Internal Clearance Specification	Greater Than Normal Clearance
Corner Radius [Min]	2.10 mm
Locking Device	No Locking Device
Limiting Speed - Oil	6300 rpm
Limiting Speed - Grease	3600 rpm
Material	Steel
Bore Type	Round Bore
O.D.	130.0000 mm
Snap Ring	No Snap Ring
Precision Level	Standard (ABEC 1)
Cage Material	Pressed Steel
O.D. Type	Straight
No. in Set	Single Bearing
Seal Material	Buna-N
Bearing Type	Radial
Inch/Metric	Metric Bore
Width	31 mm
Precision	Standard
Seal Type	Contact Seals
Dynamic Load Rating	19,356.00 lbf
Lubricant	Mul-Temp SRL
Rows of Balls	Single
I.D.	60 mm
Ball Material	Steel
Static Load Rating [Max]	11,680.00 lbf
Inner Ring Width	31 mm
icNumber	7696259
Capacity	Standard Capacity
Radial Internal Clearance	C3
Enclosure	Double Sealed
Weight	3.968 LB
EAN or UPC	29176065903