6219DDUC3

HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100761685

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

I.D.	95 mm
Cage Type	Metal
Radial Internal Clearance	C3
Width	32 mm
Limiting Speed - Grease	2600 rpm
No. in Set	Single Bearing
O.D. Type	Straight
Precision Level	Standard (ABEC 1)
Capacity	Standard Capacity
Inner Ring Width	32 mm
Snap Ring	No Snap Ring
Radial Internal Clearance Specification	Greater Than Normal Clearance
Bearing Type	Radial
Static Load Rating [Max]	18,434.00 lbf
Corner Radius [Min]	2.10 mm
Enclosure	Double Sealed
O.D.	170.0000 mm
Locking Device	No Locking Device
Rows of Balls	Single
Outer Ring Width	32 mm
Material	Steel
Seal Material	Buna-N
Cage Material	Pressed Steel
Ball Material	Steel
Bore Type	Round Bore
Precision	Standard
Seal Type	Contact Seals
Contact Angle	0°
Lubricant	Mul-Temp SRL
Limiting Speed - Oil	4500 rpm
Inch/Metric	Metric Bore
Dynamic Load Rating	24,504.00 lbf
Preload Level	None
Weight	5.846 LB
EAN or UPC	29176064890