6216

HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100761608

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Rows of Balls	Single
Inch/Metric	Metric Bore
Snap Ring	No Snap Ring
O.D. Type	Straight
Seal Material	None
Limiting Speed - Oil	5300 rpm
Outer Ring Width	26 mm
Bore Type	Round Bore
Preload Level	None
Dynamic Load Rating	17,114.00 lbf
Contact Angle	0°
Static Load Rating [Max]	11,900.00 lbf
No. in Set	Single Bearing
O.D.	140.0000 mm
Limiting Speed - Grease	4500 rpm
Lubricant	Oil Preservative
Cage Material	Pressed Steel
Corner Radius [Min]	2.00 mm
Bearing Type	Radial
Ball Material	Steel
Precision Level	Standard (ABEC 1)
icNumber	7699320
I.D.	80 mm
Capacity	Standard Capacity
Radial Internal Clearance	Normal
Radial Internal Clearance Specification	Normal Clearance
Enclosure	Open
Seal Type	Unsealed
Inner Ring Width	26 mm
Locking Device	No Locking Device
Precision	Standard
Cage Type	Metal
Width	26 mm
Material	Steel
Weight	3.046 LB
EAN or UPC	29176015533