Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.
applications
Transmissions
Electric motors and generators
Electrical appliances
Pumps and compressors
Blowers and fans
Speed changers
Gearboxes and drives
Woodworking machinery
Lawn and garden equipment
compliances
Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
caution
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing
Corner Radius [Min]
0.6 mm
I.D.
1/2 in
O.D.
1.5748 in
Preload Level
None
Snap Ring
No Snap Ring
Limiting Speed - Grease
17000 rpm
Rows of Balls
Single
O.D. Type
Straight
Limiting Speed - Oil
N/A
Contact Angle
0°
Capacity
Standard Capacity
Dynamic Load Rating
2147 lbf
Inch/Metric
Inch Bore
Static Load Rating [Max]
1079 lbf
Enclosure
Double Sealed
Material
Steel
Seal Material
Rubber
Locking Device
No Locking Device
Cage Material
Pressed Steel
Precision
Standard
Seal Type
Non-Contact Seals
Radial Internal Clearance
Normal
Bearing Type
Radial
Precision Level
Standard (ABEC 1)
Outer Ring Width
12 mm
Ball Material
Steel
Cage Type
Metal
Bore Type
Round Bore
Radial Internal Clearance Specification
Normal Clearance
Weight
0.143 LB
EAN or UPC
29176069437
We're here for you
with Service Centers across the country - We have your back