6200ZZC3

HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100760829

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Cage Material	Pressed Steel
Precision Level	Standard (ABEC 1)
Preload Level	None
Precision	Standard
Seal Material	Metal
Enclosure	Double Shielded
Rows of Balls	Single
Snap Ring	No Snap Ring
Inch/Metric	Metric Bore
Outer Ring Width	9 mm
Corner Radius [Min]	0.30 mm
I.D.	10 mm
Radial Internal Clearance Specification	Greater Than Normal Clearance
Inner Ring Width	9 mm
Bearing Type	Radial
Ball Material	Steel
Bore Type	Round Bore
Lubricant	Mul-Temp SRL
Limiting Speed - Grease	24000 rpm
Capacity	Standard Capacity
Limiting Speed - Oil	30000 rpm
Width	9 mm
Seal Type	Non-Contact Seals
No. in Set	Single Bearing
Radial Internal Clearance	C3
Material	Steel
O.D. Type	Straight
Dynamic Load Rating	1,150.00 lbf
Contact Angle	0°
Locking Device	No Locking Device
Cage Type	Metal
O.D.	30.0000 mm
Static Load Rating [Max]	537.00 lbf
icNumber	7695963
Weight	0.066 LB
EAN or UPC	29176013638