Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 60 Number of Teeth
- 7.132 in Outside Diameter
- L Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Width Across Teeth | 0.75 in |
| Bore Type | Bushed |
| Length Through Bore | 1.25 in |
| Hub Dia. | 4 3/8 in |
| Belt Pitch | 0.375 in |
| Material | Cast Iron |
| Outside Dia. | 7.132 in |
| Belt Width | 0.5 in |
| Finished Bore | N/A |
| Hub Type | C |
| Type | C |
| Pitch Diameter | 7.162 in |
| No. of Teeth | 60 |
| Bushing Type | Taper-Lock |
| Hub Projection | 1/4 in |
| Bushing Series | 2012 |
| Belt Size | L |
| Bore Range [Max] | 2 in |
| Bore Range [Min] | 0.5 in |
| Weight | 7.49 LB |
| EAN or UPC | 697950084060 |
