Find a Service Center
- 0.5 in Belt Pitch
- 3 in Belt Width
- 60 Number of Teeth
- 9.495 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Range [Min] | 0.875 in |
| Hub Projection | 0.343 in |
| Belt Pitch | 0.5 in |
| Outside Dia. | 9.495 in |
| Pitch Diameter | 9.549 in |
| Finished Bore | N/A |
| Width Across Teeth | 1.3125 in |
| Length Through Bore | 2 in |
| Type | C-2 |
| Belt Width | 3 in |
| Bore Type | Bushed |
| Bushing Type | Taper-Lock |
| Belt Size | H |
| Hub Type | B |
| No. of Teeth | 60 |
| Material | Steel |
| Hub Dia. | 6 1/4 in |
| Bore Range [Max] | 3 in |
| Bushing Series | 3020 |
| Weight | 21.9 LB |
| EAN or UPC | 697950084022 |
