Find a Service Center
- 0.375 in Belt Pitch
- 0.75 in Belt Width
- 48 Number of Teeth
- 5.7 in Outside Diameter
- L Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Length Through Bore | 1.25 in |
| Width Across Teeth | 0.813 in |
| Bore Range [Max] | 2 in |
| Belt Size | L |
| Bore Range [Min] | 0.5 in |
| Bushing Series | 2012 |
| Hub Type | B |
| Pitch Diameter | 5.73 in |
| Finished Bore | N/A |
| Belt Pitch | 0.375 in |
| No. of Teeth | 48 |
| Type | KF |
| Belt Width | 0.75 in |
| Material | Cast Iron |
| Hub Dia. | 3.937 in |
| Bushing Type | Taper-Lock |
| Hub Projection | 1/4 in |
| Outside Dia. | 5.7 in |
| Bore Type | Bushed |
| Weight | 5.5 LB |
| EAN or UPC | 697950083988 |
