Find a Service Center
- 0.5 in Belt Pitch
- 3 in Belt Width
- 32 Number of Teeth
- 5.069 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Pitch | 0.5 in |
| Hub Type | B |
| Bore Type | Bushed |
| Bore Range [Min] | 0.5 in |
| Hub Projection | 0.437 in |
| Outside Dia. | 5.069 in |
| Hub Dia. | 4.437 in |
| Material | Steel |
| Pitch Diameter | 5.093 in |
| Finished Bore | N/A |
| Belt Size | H |
| Bore Range [Max] | 2.5 in |
| Bushing Series | 2517 |
| Type | CF-1 |
| No. of Teeth | 32 |
| Bushing Type | Taper-Lock |
| Width Across Teeth | 1.063 in |
| Length Through Bore | 1.75 in |
| Belt Width | 3 in |
| Weight | 4.5 LB |
| EAN or UPC | 697950083759 |
