Find a Service Center
- 0.875 in Belt Pitch
- 2 in Belt Width
- 30 Number of Teeth
- 8.246 in Outside Diameter
- XH Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Material | Cast Iron |
| Bore Type | Bushed |
| Length Through Bore | 3.5 in |
| Hub Type | B |
| Belt Size | XH |
| Belt Width | 2 in |
| Belt Pitch | 0.875 in |
| Bore Range [Min] | 1.1875 in |
| Finished Bore | N/A |
| Hub Projection | 1 in |
| Width Across Teeth | 2.25 in |
| No. of Teeth | 30 |
| Bushing Type | Taper-Lock |
| Outside Dia. | 8.246 in |
| Hub Dia. | 6 1/2 in |
| Bore Range [Max] | 3.5 in |
| Type | CF |
| Pitch Diameter | 8.356 in |
| Bushing Series | 3535 |
| Weight | 27.0 LB |
| EAN or UPC | 697950083735 |
