Find a Service Center
- 0.5 in Belt Pitch
- 1 in Belt Width
- 30 Number of Teeth
- 4.721 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Pitch Diameter | 4.775 in |
| Bushing Type | Taper-Lock |
| Type | KF |
| Width Across Teeth | 1.062 in |
| Bore Type | Bushed |
| Finished Bore | N/A |
| Belt Pitch | 0.5 in |
| Material | Cast Iron |
| No. of Teeth | 30 |
| Bore Range [Min] | 0.5 in |
| Bushing Series | 2012 |
| Belt Size | H |
| Outside Dia. | 4.721 in |
| Belt Width | 1 in |
| Bore Range [Max] | 2 in |
| Hub Type | A |
| Length Through Bore | 1.313 in |
| Weight | 3.9 LB |
| EAN or UPC | 697950083667 |
