Find a Service Center
- 0.875 in Belt Pitch
- 2 in Belt Width
- 28 Number of Teeth
- 7.689 in Outside Diameter
- XH Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Range [Max] | 3.5 in |
| No. of Teeth | 28 |
| Pitch Diameter | 7.799 in |
| Finished Bore | N/A |
| Belt Width | 2 in |
| Bore Range [Min] | 1.1875 in |
| Type | CF |
| Belt Pitch | 0.875 in |
| Belt Size | XH |
| Length Through Bore | 3.5 in |
| Bushing Type | Taper-Lock |
| Outside Dia. | 7.689 in |
| Bore Type | Bushed |
| Hub Dia. | 6 1/2 in |
| Hub Projection | 1 in |
| Hub Type | B |
| Material | Cast Iron |
| Bushing Series | 3535 |
| Width Across Teeth | 2.25 in |
| Weight | 22.0 LB |
| EAN or UPC | 697950083643 |
