Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 26 Number of Teeth
- 3.074 in Outside Diameter
- L Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Material | Steel |
| Length Through Bore | 1 in |
| Bushing Type | Taper-Lock |
| Hub Type | B |
| Hub Projection | 1/4 in |
| Belt Width | 0.5 in |
| Outside Dia. | 3.074 in |
| Bore Type | Bushed |
| Type | CF |
| Finished Bore | N/A |
| Hub Dia. | 2 1/2 in |
| Pitch Diameter | 3.104 in |
| Bore Range [Min] | 0.5 in |
| Belt Pitch | 0.375 in |
| Bore Range [Max] | 1.25 in |
| Belt Size | L |
| No. of Teeth | 26 |
| Bushing Series | 1210 |
| Width Across Teeth | 0.563 in |
| Weight | 1.12 LB |
| EAN or UPC | 697950083520 |
