Find a Service Center
- 0.875 in Belt Pitch
- 3 in Belt Width
- 24 Number of Teeth
- 6.575 in Outside Diameter
- XH Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Finished Bore | N/A |
| Width Across Teeth | 3.313 in |
| Material | Cast Iron |
| Bushing Series | 3020 |
| Outside Dia. | 6.575 in |
| Bushing Type | Taper-Lock |
| Pitch Diameter | 6.685 in |
| Belt Size | XH |
| Length Through Bore | 2 in |
| Type | KF |
| No. of Teeth | 24 |
| Bore Range [Max] | 3 in |
| Bore Range [Min] | 0.875 in |
| Hub Type | A |
| Bore Type | Bushed |
| Belt Width | 3 in |
| Belt Pitch | 0.875 in |
| Weight | 15.3 LB |
| EAN or UPC | 697950083476 |
