Find a Service Center
- 0.875 in Belt Pitch
- 3 in Belt Width
- 22 Number of Teeth
- 6.017 in Outside Diameter
- XH Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Size | XH |
| Bore Range [Min] | 0.5 in |
| Bore Range [Max] | 2.5 in |
| Width Across Teeth | 3.313 in |
| Length Through Bore | 1.75 in |
| Bushing Type | Taper-Lock |
| Finished Bore | N/A |
| Bore Type | Bushed |
| Belt Width | 3 in |
| Hub Type | A |
| Type | KF |
| No. of Teeth | 22 |
| Outside Dia. | 6.017 in |
| Material | Cast Iron |
| Bushing Series | 2517 |
| Belt Pitch | 0.875 in |
| Pitch Diameter | 6.127 in |
| Weight | 12.36 LB |
| EAN or UPC | 697950083384 |
