Find a Service Center
- 0.5 in Belt Pitch
- 3 in Belt Width
- 22 Number of Teeth
- 3.447 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Outside Dia. | 3.447 in |
| Hub Projection | 0.312 in |
| Bore Range [Max] | 1.625 in |
| Belt Pitch | 0.5 in |
| Belt Width | 3 in |
| Width Across Teeth | 1.063 in |
| No. of Teeth | 22 |
| Bore Type | Bushed |
| Length Through Bore | 1 in |
| Type | KF-1 |
| Bushing Series | 1610 |
| Pitch Diameter | 3.501 in |
| Bushing Type | Taper-Lock |
| Hub Type | A |
| Bore Range [Min] | 0.5 in |
| Belt Size | H |
| Material | Steel |
| Finished Bore | N/A |
| Weight | 1.8 LB |
| EAN or UPC | 697950083308 |
