Skip to content Skip to navigation menu
MartinM1612

M1612

Miter Gear
Item #100811545
  • 20° Pressure Angle
  • 12 Teeth
  • 16 Diametral Pitch
  • 0.16 in Face Width
  • 0.75 in Pitch Diameter
  • Reborable
  • 0.3125 in Minimum Bore Size
+ Show More + Show Less
MartinM1612
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 20° Pressure Angle
  • 12 Teeth
  • 16 Diametral Pitch
  • 0.16 in Face Width
  • 0.75 in Pitch Diameter

description

  • All standard stock miter gears must be mounted at right angles (90°) for proper tooth bearings.

features

  • All Martin Gears are cut with the 20° pressure angle system
  • Hardened miter gears have approximately 50% more horsepower capacity and provide greater gear wear than untreated gears
  • The mounting distance must be held in order to maintain proper bachlash between gears. The use of a straight mineral oil as a lubricant is recommended for most miter gear applications
  • All Martin Miter Gears are cut with the 20° pressure angle system.
  • The use of a straight mineral oil as a lubricant is recommended for most Miter Gear applications.
Length Through Bore 0.58 in
Hub O.D. 5/8 in
Mounting Distance 0.81 in
Ratio 1:1
Torque at 900 RPM N/A
Torque at 300 RPM N/A
Bore Size 0.3125 in
Torque at 200 RPM N/A
Bore Type Reborable
Hardened Teeth Without Hardened Teeth
Torque at 1800 RPM N/A
Outside Dia. 0.837 in
Spiral Direction Straight
Torque at 1200 RPM N/A
Material Steel
Diametral Pitch 16
Pitch Diameter 0.75 in
Bore Size [Max] 0.501 in
No. of Teeth 12
Hub Projection 0.3725 in
Torque at 600 RPM N/A
Pressure Angle 20 °
Inch/Metric Inch
Weight 0.04 LB
EAN or UPC 697950052328
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison