Find a Service Center
- 0.375 in Belt Pitch
- 1 in Belt Width
- 30 Number of Teeth
- 3.595 in Outside Diameter
- L100 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Range [Min] | 0.625 in |
| Finished Bore | N/A |
| Type | PB |
| Pitch Diameter | 3.581 in |
| Hub Dia. | 2 7/8 in |
| Outside Dia. | 3.595 in |
| Length Through Bore | 2.25 in |
| Belt Pitch | 0.375 in |
| No. of Teeth | 30 |
| Bushing Type | None |
| Belt Width | 1 in |
| Bushing Series | N/A |
| Hub Type | B |
| Belt Size | L100 |
| Hardened Teeth | Without Hardened Teeth |
| Hub Projection | 1 in |
| Bore Type | Reborable |
| Material | Steel |
| Bore Range [Max] | 1.875 in |
| Weight | 4.0 LB |
| EAN or UPC | 697950151953 |
