Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 30 Number of Teeth
- 3.595 in Outside Diameter
- L050 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Finished Bore | N/A |
| Belt Size | L050 |
| Belt Pitch | 0.375 in |
| Hub Dia. | 2 7/8 in |
| Belt Width | 0.5 in |
| Material | Steel |
| No. of Teeth | 30 |
| Pitch Diameter | 3.581 in |
| Type | PB |
| Bore Type | Reborable |
| Bore Range [Max] | 1.625 in |
| Hub Type | B |
| Bushing Type | None |
| Hub Projection | 3/4 in |
| Bushing Series | N/A |
| Bore Range [Min] | 0.5 in |
| Hardened Teeth | Without Hardened Teeth |
| Length Through Bore | 1.5 in |
| Outside Dia. | 3.595 in |
| Weight | 2.7 LB |
| EAN or UPC | 697950151915 |
