Find a Service Center
- 0.375 in Belt Pitch
- 1 in Belt Width
- 26 Number of Teeth
- 3.114 in Outside Diameter
- L100 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Type | None |
| Hardened Teeth | Without Hardened Teeth |
| Belt Size | L100 |
| Bore Range [Min] | 0.625 in |
| Hub Projection | 7/8 in |
| Pitch Diameter | 3.104 in |
| Bore Type | Reborable |
| Bushing Series | N/A |
| Bore Range [Max] | 1.625 in |
| Hub Type | B |
| Type | PB |
| Belt Width | 1 in |
| Hub Dia. | 2 1/2 in |
| Belt Pitch | 0.375 in |
| Length Through Bore | 2.125 in |
| Material | Steel |
| Finished Bore | N/A |
| Outside Dia. | 3.114 in |
| No. of Teeth | 26 |
| Weight | 3.3 LB |
| EAN or UPC | 697950151748 |
