Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 26 Number of Teeth
- 3.076 in Outside Diameter
- L Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Pitch | 3/8 in |
| Belt Size | L |
| Bushing Series | SH |
| Type | GF |
| Belt Width | 1/2 in |
| Bore Range [Max] | 1 5/8 in |
| Bore Type | Bushed |
| Bore Range [Min] | 1/2 in |
| Length Through Bore | 3/4 in |
| Bushing Type | Quick Disconnect |
| No. of Teeth | 26 |
| Hardened Teeth | With Hardened Teeth |
| Material | Steel |
| Finished Bore | N/A |
| Outside Dia. | 3.0760 in |
| Hub Type | A |
| Pitch Diameter | 3.104 in |
| Weight | 0.88 LB |
| EAN or UPC | 697950151717 |
