Find a Service Center
- 0.5 in Belt Pitch
- 1 in Belt Width
- 24 Number of Teeth
- 3.768 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Paper machinery
- Pumps
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Length Through Bore | 1.313 in |
| Belt Width | 1 in |
| Bushing Series | SDS |
| Pitch Diameter | 3.820 in |
| Bore Range [Min] | 1/2 in |
| Type | EF-1 |
| Bore Range [Max] | 2 in |
| Hub Type | A |
| Belt Size | H |
| Bore Type | Bushed |
| Finished Bore | N/A |
| Material | Steel |
| Bushing Type | Quick Disconnect |
| No. of Teeth | 24 |
| Belt Pitch | 1/2 in |
| Outside Dia. | 3.7660 in |
| Hardened Teeth | With Hardened Teeth |
| Weight | 2.0 LB |
| EAN or UPC | 697950151519 |
