Find a Service Center
- 0.375 in Belt Pitch
- 1 in Belt Width
- 22 Number of Teeth
- 2.596 in Outside Diameter
- L100 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Range [Max] | 1.5 in |
| No. of Teeth | 22 |
| Bushing Type | None |
| Bushing Series | N/A |
| Belt Size | L100 |
| Bore Type | Reborable |
| Length Through Bore | 2 in |
| Outside Dia. | 2.596 in |
| Hub Dia. | 2 in |
| Pitch Diameter | 2.626 in |
| Hub Type | B |
| Belt Pitch | 0.375 in |
| Belt Width | 1 in |
| Hardened Teeth | Without Hardened Teeth |
| Bore Range [Min] | 0.625 in |
| Finished Bore | N/A |
| Material | Steel |
| Type | PB |
| Hub Projection | 3/4 in |
| Weight | 2.0 LB |
| EAN or UPC | 697950151489 |
