Find a Service Center
- 0.5 in Belt Pitch
- 1.5 in Belt Width
- 22 Number of Teeth
- 3.447 in Outside Diameter
- H150 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Hub Projection | 1 in |
| Outside Dia. | 3.4470 in |
| Pitch Diameter | 3.501 in |
| Hub Dia. | 2 7/8 in |
| No. of Teeth | 22 |
| Hardened Teeth | With Hardened Teeth |
| Bore Type | Reborable |
| Bushing Type | None |
| Type | DF-1 |
| Belt Width | 1 1/2 in |
| Bore Range [Min] | 3/4 in |
| Bore Range [Max] | 1 7/8 in |
| Length Through Bore | 2.812 in |
| Finished Bore | N/A |
| Belt Pitch | 1/2 in |
| Hub Type | B |
| Belt Size | H |
| Bushing Series | N/A |
| Material | Steel |
| Weight | 2.0 LB |
| EAN or UPC | 697950151397 |
