Find a Service Center
- 0.375 in Belt Pitch
- 1 in Belt Width
- 21 Number of Teeth
- 2.521 in Outside Diameter
- L100 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Series | N/A |
| Bore Range [Max] | 1.312 in |
| Type | PB |
| Belt Width | 1 in |
| Hub Projection | 0.688 in |
| Belt Pitch | 0.375 in |
| Hub Dia. | 1 7/8 in |
| Outside Dia. | 2.521 in |
| Hub Type | B |
| Finished Bore | N/A |
| Bushing Type | None |
| Length Through Bore | 1.875 in |
| Bore Type | Reborable |
| Hardened Teeth | Without Hardened Teeth |
| Material | Steel |
| Bore Range [Min] | 0.625 in |
| No. of Teeth | 21 |
| Belt Size | L100 |
| Pitch Diameter | 2.507 in |
| Weight | 1.8 LB |
| EAN or UPC | 697950151366 |
