Find a Service Center
- 0.2 in Belt Pitch
- 0.25 and 0.375 in Belt Width
- 18 Number of Teeth
- 1.126 in Outside Diameter
- XL037 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Hardened Teeth | Without Hardened Teeth |
| Belt Pitch | 0.200 in |
| Bore Range [Min] | 1/4 in |
| Belt Size | XL |
| Bushing Type | None |
| Bore Type | Bushed |
| Finished Bore | N/A |
| Hub Projection | 0.218 in |
| Hub Dia. | 0.812 in |
| No. of Screws | 2 |
| Pitch Diameter | 1.146 in |
| Bushing Series | N/A |
| Belt Width | 1/4 in, 3/8 in |
| Hub Type | B |
| Set Screw Size | 8-32 x 1/8 |
| No. of Teeth | 18 |
| Length Through Bore | 0.781 in |
| Material | Steel |
| Outside Dia. | 1.1260 in |
| Bore Range [Max] | 9/16 in |
| Type | DF-1 |
| Weight | 0.13 LB |
| EAN or UPC | 697950105581 |
