Find a Service Center
- 0.375 in Belt Pitch
- 1 in Belt Width
- 18 Number of Teeth
- 2.119 in Outside Diameter
- L100 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Range [Max] | 1.187 in |
| Belt Size | L100 |
| Pitch Diameter | 2.149 in |
| Length Through Bore | 1.875 in |
| Finished Bore | N/A |
| Hub Dia. | 1 5/8 in |
| Belt Width | 1 in |
| Hub Type | B |
| Type | PB |
| Hardened Teeth | Without Hardened Teeth |
| Outside Dia. | 2.119 in |
| Hub Projection | 5/8 in |
| Belt Pitch | 0.375 in |
| No. of Teeth | 18 |
| Bushing Type | None |
| Material | Steel |
| Bore Type | Reborable |
| Bore Range [Min] | 0.5 in |
| Bushing Series | N/A |
| Weight | 1.1 LB |
| EAN or UPC | 697950151151 |
