Find a Service Center
- 0.5 in Belt Pitch
- 2 in Belt Width
- 18 Number of Teeth
- 2.811 in Outside Diameter
- H200 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Hardened Teeth | With Hardened Teeth |
| Bore Range [Min] | 0.75 in |
| Length Through Bore | 3.093 in |
| Pitch Diameter | 2.865 in |
| Material | Steel |
| Bore Range [Max] | 1.5 in |
| Hub Projection | 3/4 in |
| Belt Width | 2 in |
| Type | DF-1 |
| Bushing Series | N/A |
| No. of Teeth | 18 |
| Belt Size | H200 |
| Hub Type | B |
| Outside Dia. | 2.811 in |
| Bushing Type | None |
| Bore Type | Reborable |
| Hub Dia. | 2 in |
| Belt Pitch | 0.5 in |
| Finished Bore | N/A |
| Weight | 3.7 LB |
| EAN or UPC | 697950151090 |
