Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 17 Number of Teeth
- 1.999 in Outside Diameter
- L050 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Type | None |
| Type | PB |
| No. of Teeth | 17 |
| Belt Pitch | 0.375 in |
| Hub Type | B |
| Pitch Diameter | 2.029 in |
| Hub Projection | 5/8 in |
| Belt Width | 0.5 in |
| Finished Bore | N/A |
| Bushing Series | N/A |
| Outside Dia. | 1.999 in |
| Bore Type | Reborable |
| Hub Dia. | 1.437 in |
| Material | Steel |
| Hardened Teeth | Without Hardened Teeth |
| Bore Range [Max] | 1.125 in |
| Bore Range [Min] | 0.5 in |
| Belt Size | L050 |
| Length Through Bore | 1.25 in |
| Weight | 0.65 LB |
| EAN or UPC | 697950151038 |
