Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 16 Number of Teeth
- 1.88 in Outside Diameter
- L050 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| No. of Teeth | 16 |
| Bushing Type | None |
| Hardened Teeth | Without Hardened Teeth |
| Belt Width | 0.5 in |
| Bushing Series | N/A |
| Set Screw Size | 1/4-20 x 1/4 |
| Belt Size | L050 |
| Bore Range [Min] | 0.5 in |
| Length Through Bore | 1.375 in |
| Bore Range [Max] | 1.125 in |
| Material | Steel |
| Hub Projection | 5/8 in |
| Hub Type | B |
| Hub Dia. | 1.437 in |
| Outside Dia. | 1.88 in |
| Type | PB |
| Pitch Diameter | 1.91 in |
| Bore Type | Bushed |
| Finished Bore | N/A |
| No. of Screws | 1 |
| Belt Pitch | 0.375 in |
| Weight | 0.6 LB |
| EAN or UPC | 697950101002 |
