Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 15 Number of Teeth
- 1.76 in Outside Diameter
- L050 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Hardened Teeth | Without Hardened Teeth |
| Belt Width | 0.5 in |
| Bushing Type | None |
| Bore Range [Min] | 0.5 in |
| Belt Pitch | 0.375 in |
| Bushing Series | N/A |
| Type | PB |
| No. of Teeth | 15 |
| Hub Type | B |
| Hub Dia. | 1 1/4 in |
| Bore Type | Reborable |
| Pitch Diameter | 1.79 in |
| Hub Projection | 1/2 in |
| Finished Bore | N/A |
| Outside Dia. | 1.76 in |
| Material | Steel |
| Bore Range [Max] | 0.937 in |
| Length Through Bore | 1.25 in |
| Belt Size | L050 |
| Weight | 0.5 LB |
| EAN or UPC | 697950150963 |
