Find a Service Center
- 0.5 in Belt Pitch
- 1.5 in Belt Width
- 14 Number of Teeth
- 2.174 in Outside Diameter
- H150 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Type | None |
| Hub Type | B |
| Length Through Bore | 2.437 in |
| Bore Type | Reborable |
| Bore Range [Min] | 3/4 in |
| Bore Range [Max] | 1 in |
| Hub Projection | 5/8 in |
| Belt Pitch | 1/2 in |
| Pitch Diameter | 2.228 in |
| Outside Dia. | 2.1740 in |
| Finished Bore | N/A |
| Material | Steel |
| Type | PB |
| Hardened Teeth | With Hardened Teeth |
| No. of Teeth | 14 |
| Bushing Series | N/A |
| Belt Size | H |
| Belt Width | 1 1/2 in |
| Hub Dia. | 1 1/2 in |
| Weight | 1.8 LB |
| EAN or UPC | 697950150932 |
