Find a Service Center
Alternate Products
- 1.25 in Inner Diameter
- 4 in Outer Diameter
- 2.31 in Overall Width
- Double Sealed Enclosure
features
- Lubrication holes and lubrication groove in bore of inner ring provide relubrication when cross-drilled bolt or shaft is used
| Series | YCR |
| Inside Diameter Tolerance [Max] | 1.2501 in |
| Lubricant | Grease |
| Roller Width | 2 1/4 in |
| O.D. | 4 in, 101.6 mm |
| Material | Steel |
| Operating Temperature [Min] | -22 ËšF |
| Dynamic Capacity | 32400 lbf |
| No. of Rows | Single |
| Limiting Speed | 920 rpm |
| Roller Type | Straight |
| Enclosure | Sealed |
| Bearing Type | Needle Bearing |
| Component | Assembly |
| Shaft Diameter - Press Fit [Max] | 1.2508 in |
| Precision Class | P0 |
| Outer Ring Width | 2.25 in, 57.15 mm |
| Working Load | 41000 lbf |
| Inch/Metric | Inch |
| Operating Temperature [Max] | 230 ËšF |
| O.D. Type | Straight |
| Overall Width | 2 5/16 in |
| Bore Type | Round |
| Rolling Element | Needle Roller |
| Overall Width Tolerance [Min] | 2.3030 in |
| Roller Dia. | 4 in |
| Inner Ring Width | 2.31 in, 58.74 mm |
| Relubrication Feature | No |
| Overall Width Tolerance [Max] | 2.3180 in |
| Inside Diameter Tolerance [Min] | 1.2495 in |
| Shaft Diameter - Press Fit [Min] | 1.2503 in |
| Relubricatable | No |
| I.D. | 1 1/4 in |
| Clamping Dia. | 2.281 in |
| Self Aligning | No |
| Shaft Diameter - Slip Fit [Max] | 1.2496 in |
| Speed (Max) Grease | 780 rpm |
| Shaft Diameter - Slip Fit [Min] | 1.2491 in |
| Weight | 7.11 LB |
| EAN or UPC | 605790193637 |
