Find a Service Center
Alternate Products
- 0.5 in Inner Diameter
- 1.75 in Outer Diameter
- 1.06 in Overall Width
- Double Sealed Enclosure
features
- Lubrication holes and lubrication groove in bore of inner ring provide relubrication when cross-drilled bolt or shaft is used
| No. of Rows | Single |
| Relubrication Feature | No |
| Working Load | 8100 lbf |
| Speed (Max) Grease | 1900 rpm |
| Outer Ring Width | 1 in, 25.4 mm |
| Precision Class | P0 |
| Limiting Speed | 1700 rpm |
| Inside Diameter Tolerance [Max] | 0.5002 in |
| Series | YCR |
| Roller Width | 1 in |
| Overall Width Tolerance [Min] | 1.0525 in |
| Overall Width | 1 1/16 in |
| Component | Assembly |
| Operating Temperature [Max] | 230 ˚F |
| Roller Dia. | 1 3/4 in |
| Shaft Diameter - Press Fit [Max] | 0.5007 in |
| Self Aligning | No |
| Bore Type | Round |
| Inner Ring Width | 1.06 in, 26.99 mm |
| O.D. | 1.75 in, 44.45 mm |
| Overall Width Tolerance [Max] | 1.0675 in |
| Operating Temperature [Min] | -22 ˚F |
| Shaft Diameter - Press Fit [Min] | 0.5003 in |
| I.D. | 1/2 in |
| Lubricant | Grease |
| Inside Diameter Tolerance [Min] | 0.4996 in |
| Dynamic Capacity | 7080 lbf |
| Shaft Diameter - Slip Fit [Max] | 0.4997 in |
| Roller Type | Straight |
| Rolling Element | Needle Roller |
| Relubricatable | No |
| Material | Steel |
| Clamping Dia. | 1.047 in |
| Inch/Metric | Inch |
| Enclosure | Sealed |
| Bearing Type | Needle Bearing |
| O.D. Type | Straight |
| Shaft Diameter - Slip Fit [Min] | 0.4993 in |
| Weight | 0.66 LB |
| EAN or UPC | 605790219153 |
