Find a Service Center
- 0.5 in Inner Diameter
- 0.75 in Outer Diameter
- 0.88 in Overall Width
description
- Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.
features
- -FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
- A polymer spring is standard for the RC and RCB
- A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
- A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
- A press fit into the housing is required
| Origin | Roller Clutches |
| Overall Width | 0.88 in, 22.23 mm |
| Speed (Max) Oil | 17000 rpm |
| Component | Assembly |
| Shaft Dia. [Max] | 0.5 in |
| Tolerance | Iso Class 0 (RBEC 1) |
| Clamp Torque | 73.6 lbf |
| Oil Hole | w/o Oil Hole |
| Housing Bore [Min] | 0.7495 in |
| Relubrication Feature | No |
| No. of Rows | 3 |
| Dynamic Load Rating | 7.12 kN |
| Series | RCB |
| Capacity | Standard Capacity |
| Outer Ring Width | 0.88 in, 22.23 mm |
| I.D. | 1/2 in |
| Radial Internal Clearance Specification | N/A |
| Cage Type | Window |
| Cage Material | Nylon |
| Housing Shoulder Diameter | 1.1 in |
| Precision Class | ABEC 1 |
| Mounting Method | Press Fit |
| Housing Bore [Max] | 0.7505 in |
| Lubricant | Rust Preventative |
| O.D. Type | Straight |
| End Type | Open End |
| Self Aligning | No |
| Operating Temperature [Max] | 230 ËšF |
| Shaft Dia. [Min] | 0.4995 in |
| Precision Ground | Yes |
| Rolling Element | Roller |
| Bore Type | Round Bore, Inch Type |
| O.D. | 0.75 in |
| Operating Temperature [Min] | -22 ËšF |
| Static Load Rating | 6.49 kN |
| Bearing Material | 1014 Steel |
| Enclosure | Open |
| Relubricatable | No |
| Radial Internal Clearance | N/A |
| Working Load | 720 lbf |
| Bearing Design | Roller Clutch |
| Weight | 0.005 LB |
| EAN or UPC | 605790205729 |
