Find a Service Center
- 0.38 in Inner Diameter
- 0.63 in Outer Diameter
- 0.88 in Overall Width
description
- Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.
features
- -FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
- A polymer spring is standard for the RC and RCB
- A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
- A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
- A press fit into the housing is required
| Cage Type | Window |
| Mounting Method | Press Fit |
| Enclosure | Open |
| Series | RCB |
| End Type | Open End |
| Radial Internal Clearance | N/A |
| Tolerance | Iso Class 0 (RBEC 1) |
| Overall Width | 0.88 in, 22.23 mm |
| No. of Rows | 3 |
| Bore Type | Round Bore, Inch Type |
| Operating Temperature [Min] | -22 ˚F |
| Dynamic Load Rating | 6.01 kN |
| Bearing Design | Roller Clutch |
| Static Load Rating | 4.89 kN |
| Precision Ground | Yes |
| Origin | Roller Clutches |
| Working Load | 566 lbf |
| O.D. Type | Straight |
| I.D. | 3/8 in |
| Capacity | Standard Capacity |
| Relubricatable | No |
| Rolling Element | Roller |
| Cage Material | Nylon |
| Speed (Max) Oil | 18000 rpm |
| Bearing Material | 1014 Steel |
| O.D. | 0.625 in |
| Relubrication Feature | No |
| Outer Ring Width | 0.88 in, 22.23 mm |
| Lubricant | Rust Preventative |
| Housing Shoulder Diameter | 0.88 in |
| Self Aligning | No |
| Component | Assembly |
| Radial Internal Clearance Specification | N/A |
| Housing Bore [Max] | 0.6255 in |
| Shaft Dia. [Max] | 0.375 in |
| Precision Class | ABEC 1 |
| Operating Temperature [Max] | 230 ˚F |
| Housing Bore [Min] | 0.6245 in |
| Clamp Torque | 45.4 lbf |
| Oil Hole | w/o Oil Hole |
| Shaft Dia. [Min] | 0.3745 in |
| Weight | 0.004 LB |
| EAN or UPC | 605790209970 |
