Find a Service Center
- 1.18 in Inner Diameter
- 2.44 in Outer Diameter
- Deep Groove Bearing
- 0.63 in Overall Width
- Steel Bearing
applications
- Motors of various types
- Equipment that requires high reliability
features
- High speed
- High corrosion resistance
- High vacuum
- Heat-resistant
- Nonmagnetic
- High rigidity
- Insulation
| Series | 3NC |
| O.D. | 62 mm |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| I.D. | 30 mm |
| Lubricant | Isoflex Nbu 15 |
| Dynamic Load Rating | 4388 lbf |
| Ball Material | Silicon Nitride |
| Snap Ring | No Snap Ring |
| O.D. Type | Straight |
| Rolling Element | Ball |
| Operating Temperature [Min] | -22 ËšF |
| Precision | Standard |
| Seal Type | Non-Contact Seals |
| Radial Internal Clearance | C3 |
| No. in Set | Single Bearing |
| Cage Material | Polyamide Resin |
| Rolling Element Material | Ceramic |
| Static Load Rating [Max] | 2161 lbf |
| Cage Type | Plastic |
| Self Aligning | No |
| Seal Material | Metal |
| Precision Level | Standard (ABEC 1) |
| Static Load Rating | 11.3 kN |
| Locking Device | No Locking Device |
| Enclosure | Double Shielded |
| Component | Assembly |
| Relubricatable | No |
| Outer Ring Width | 16 mm |
| Overall Width | 0.63 in, 16 mm |
| Bearing Type | Radial |
| Contact Angle | 0° |
| Inch/Metric | Metric Bore |
| Retainer Type | Window |
| Capacity | Standard Capacity |
| Limiting Speed | 11000 rpm |
| Retainer Material | Polyamide (Nylon) |
| Fillet Radius | 0.04 in, 1 mm |
| Bore Type | Round Bore |
| Operating Temperature [Max] | 230 ËšF |
| Rows of Balls | Single |
| Speed (Max) Grease | 11000 rpm |
| Precision Class | Class 0 |
| Internal Clearance | C3 |
| Bearing Material | Steel |
| Material | Steel |
| Preload Level | None |
| Inner Ring Width | 16 mm |
| Weight | 0.411 LB |
| EAN or UPC | 605790028472 |
