Find a Service Center
- 4.6" Maximum Diameter
- 4.9" Stroke Length
- 2.2" Compressed Height
- 1/8" Port Size
description
- Enidine Air Springs are highly durable, precisely engineered and cost effective for use in a wide variety of actuation and vibration isolation applications. With time-tested designs, fabric-reinforced Neoprene or Natural Rubber flex member construction and corrosion-protected end retainers, Enidine Air Springs provide superior quality and performance. As an actuator, Enidine Air Springs provide linear or angular motion. As an isolator, air springs are effective in reducing the harmful effects of vibration.
applications
- Palletizers
- Labeling equipment
- Bin-tilting devices
- Conveyor systems
- Lift tables
- Roll tensioning
- Clutch and brake systems
- Textile looms
- Paper machines
- Commercial laundry machines
- Vibratory conveyors
- Electronic equipment
- Compressors
| Air Inlet Type | NPT |
| Force @ Stroke (80 psi) | 880 lbf @ 1 in, 870 lbf @ 3 in |
| Recommended Isolator Design Height [Min] | 3.800 in |
| Force @ 5 in Stroke | N/A |
| Force @ 12 in Stroke | N/A |
| End Closure | Style 2 End Retainer |
| Bumpers | w/o Bumpers |
| Style No. | YI-1S |
| Upper End Plate Diameter | 4.1 in |
| Temperature Range [Max] | 150 °F |
| Stroke Length [Max] | 4.900 in |
| Force @ Maximum Stroke (80 psi) | 310 lbf |
| Lower End Plate Diameter | 4.1 in |
| Recommended Isolator Design Height [Max] | 4.400 in |
| Force @ 8 in Stroke | N/A |
| Force @ 3 in Stroke | 830 lbf |
| Compressed Height | 2.2 in |
| Force @ 9 in Stroke | N/A |
| Blind Tap for Mounting | 3/8-16 UNC x 0.50 Deep |
| Bellows Type | Shaped Sleeve |
| Force @ 1 in Stroke | 850 lbf |
| Air Inlet | 1/8 in |
| Force @ 6 in Stroke | N/A |
| Pressure [Max] | 100 psi |
| Force @ 4 in Stroke | N/A |
| Temperature Range [Min] | -40 °F |
| Force @ 2 in Stroke | 820 lbf |
| Weight | 1.9 LB |
